manualshive.com logo in svg

allen 068360, Safety & Operation Manual

The "Allen 068360" Safety & Operation Manual is an essential guide for utilizing the product effectively and securely. Easily download the comprehensive manual for free from our website and gain invaluable insights on operating this exceptional product with confidence and peace of mind.

Share
Download
background image

069970

Page 9

GENERAL

INFORMATION

Machine Specifications

•  Horse Power:  ............................................................................................................ 50 hp [37.3 kW]
•  Fuel Capacity: .............................................................................................................. 13 Gal [49.2 L]
•  Retardant Capacity: ....................................................................................................... 6 Gal [22.7 L]
•  Fuel Consumption (Approx.): ....................................................................................2.4 GPH [9.1 LPH] 
•  Steering System: ..................................................................................................................Hydraulic
•  Hydraulic Capacity: ......................................................................................................... 15 Gal [56.8]
•  Number of Operating Lights: ............................................................................................................. 6
•  Height: .................................................................................................................60-3/4" [154.2 cm]
•  Length:  ..............................................................................................................107-1/8" [272.1 cm]
•  Width:  ..................................................................................................................52-7/8" [134.3 cm]
•  Dry Weight:  ........................................................................................................2128 lbs [965.25 Kg]
•  Panning Width: .............................................................................................................100" [254 cm]
•  Rotor Center Distance: .................................................................................................58" [147.3 cm]
•  Rotor Diameter: ...........................................................................................................46" [116.8 cm]
•  Rotor Speed: ...................................................................................................................10-165 RPM
•  Idle RPM: .................................................................................................................................... 1100
•  Full RPM: .................................................................................................................................... 2600
•  Lifting: ............................................................................................................... 2-point, Top-Mounted

Technical Specifications / 

Machine Dimension Detail

107 1/8

[272.1]

 in

52 7/8

[134.3]

 in

60 3/4

[154.2]

 in

Summary of Contents for 068360





























































Reviews:

No comments

Related manuals for 068360

Brands by name

Popular brands

Load more brands