Preview/Editing A Crescendo B Sequence
Touch the SHOW button to highlight it and activate the preview mode. Use the UP and
DOWN buttons to move through the step positions. The stops will turn on or off indicating
the stop registrations programmed on each step position.
To make a change to a step position, touch the SET button to highlight it and enter the
program mode. Stops can now be turned on or off to change the step registration. Once
changes are complete, press and hold the
SET
piston. Then, while holding
SET
, press the
CRES B
piston to program the changes to the step position. Return to SHOW mode by
touching the SHOW button on the display. Use the UP and DOWN buttons to move through
the step positions.
Celestes and Tremulant Cutout:
To disable the Celestes and/or Tremulants at any of the available Crescendo B steps positions,
first select a step position where the cutout will begin. Touch the SET button to enter the
programming mode. Then, touch the “Crescendo B Cutout Enabled” button to highlight it.
Doing this will set the cutout starting point on the displayed step position. All subsequent
step positions will also be automatically set.
Note:
Registrations and/or the memory settings for the PISTONS are not affected by
resetting the Crescendo B.
Play the Organ Using Crescendo B
The
Home
screen must be displayed. Press HOME to return to the
Home
screen. Press the
CRES. B
piston. On the GeniSys” display, the green CRES B indicator will illuminate below
the expression bar graphs. Depress the Crescendo shoe and play the organ.
Editing/Preview Tutti B Registrations
While in the Crescendo B and Tutti B programming function, pressing a Tutti piston will
change the STEP display to indicate which Tutti piston was pressed. If SHOW mode is
selected, the stop registration programmed on the Tutti selected will be activated. To change
the selected Tutti, touch the SET button to highlight it and activate and enter the program
mode. Stops can now be turned on or off to change the registration. Once changes are
complete, press and hold the
SET
piston. Then, while holding
SET
, press the
TUTTI
piston
selected to save the changes. Return to SHOW mode by touching the SHOW button on the
display.
Play the organ Using Tutti B
The
Home
screen must be displayed. Press HOME to return to the
Home
screen. Press the
CRES. B
piston. On the GeniSys” display, the green CRES B indicator will illuminate below
the expression bar graphs. Press the
Tutti
piston
of your choice. The red Tutti indicator will
display to indicate which Tutti is active.
28
