XV. SAFETY INFORMATION
USA ONLY
CAUTION
Never plug the instrument into any current source other than 110 to 120 volts, 50/60 Hertz
alternating current (AC). A verified grounded outlet is essential to proper operation and
protection of the instrument. Proper polarity should be checked with an AC circuit analyzer
before connecting the organ.
Do not change the cable plug or remove the ground pin or connect with a two-pole ground
lift adapter.
If you are in doubt about your electrical connection, consult your local electrician or power
company.
In facilities where circuit breakers are turned off between uses (as for example, between
worship services), the circuit breaker affecting the organ console AC power should have a
guard installed to prevent it from accidentally being switched off.
It is important that you read and comply with all instructions and labels that might be
attached to the instrument.
Warning
: This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause
interference to radio communications. It has been type tested and found to comply
with the limits for a Class B Computing Device in accordance with the specifications
in Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable
protection against such interference in a residential installation. Should this equipment
cause interference to radio communications, the user at his own expense will be
required to take whatever measures may be necessary to correct the interference.
Whether this equipment actually causes the interference to radio communications can
be determined by turning the equipment off and on. The user is encouraged to attempt
to correct the interference by one or more of the following measures:
Reorient the receiving antenna.
Relocate the organ with respect to the receiver.
Move the organ away from the receiver.
Plug the organ into a different electrical outlet, so that the organ and receiver are on
different branch circuits.
If necessary, the user should consult the dealer or an experienced radio technician for
additional suggestions.
CE mark shows compliance with the EMC Directive.
14
