The GeniSys™ Display screen is very bright so that the contents of the screen can be seen in
bright light environments. However, there maybe times where the brightness of the screen
can interfere with the organist and/or environment, ex: candlelight or evening services.
GeniSys™ Display includes a special “hidden” function to turn off the display for those
times. To turn off the display, simply touch the screen anywhere within the
expression/crescendo bar graph area and the screen will turn off (see illustration below).
To turn the display back on, touch any area of the screen.
2.
Capture Memory Physics
The capture memories allow you to save different registrations on each piston/toe stud. This
means General Piston 1 on Memory 1 can be totally different from General Piston 1 on
Memory 2, 3, 4, etc. Select a different capture memory level by touching the Memory level
button on the GeniSys™ Display and then use the up and down buttons to select a different
memory level number. Return to the
Home
screen by touching the HOME button.
3.
Locking Capture Memories
All memories, except Memory 1, may be locked or unlocked individually to prevent
unintentional or unauthorized changes to that memory’s contents.
Note:
Memory 1 remains unlocked as a convenience to visiting or substitute organists
(if
applicable)
.
The Memory level button within the GeniSys Display includes a “padlock” illustration to
indicate whether the selected capture memory level is locked or unlocked.
To lock a selected memory level, touch the Memory level button on the GeniSys™ Display to
enter the memory level selection screen. Then, touch the padlock button to enter the memory
combo-lock screen. Enter a three-digit lock code using any combination of the six (6)
available buttons on the display. Once a code has been entered, press the ENTER button to
lock the memory level. If a change to a number is needed before the ENTER button is
pressed, press the RESET button to clear the code to start over. Once the ENTER button is
pressed, the memory level will be locked and the RESET button will only clear the code
number displayed. The lock code needs to be re-entered to unlock the memory level.
Touch the HOME button to return to the
Home
screen.
Remember!
Choose an easy to remember three-digit code.
Note:
Each capture memory level lock code can be different!
16
Touch Here
