4.
Unlocking Memories Using Your Code
To unlock a selected memory level, touch the Memory level button on the GeniSys™ Display
to enter the memory level selection screen. Then, touch the padlock button to enter the
memory combo-lock screen. Using the six (6) available buttons, enter the three-digit lock
lock code that was used to lock the selected memory level. Once the code has been entered,
press the “ENTER” button to unlock the memory level. If a change to the number is needed
before the “ENTER” button is pressed, press the “RESET” button to clear the code to start
over. If the correct code was entered, the memory level will unlock, otherwise the memory
level will remain locked.
Touch the HOME button to return to the
Home
screen.
5.
Stoplist Library
The LD-34b is equipped with two voicing suites; American Classic and French Romantic.
To change the voicing specification, advance to the
'STOPLIST LIBRARY' menu function within
GeniSys™ Display; touch:
OPTIONS >> STOPLIST LIBRARY
.
The display will indicate the current voicing
specification loaded. To change the voicing
specification, use the UP and DOWN buttons. Once
the desired voicing specification is displayed, touch
the LOAD button. The display will indicate the
selected voicing specification is loading. Once the voicing specification has loaded, the
capture system will automatically cancel all stops indicating the organ is now ready to play.
Touch the HOME button to return to the
Home
screen or the BACK button to return to the
previous menu screen.
Important:
The organ will not be able to be played while a new voicing specification is
loading.
6.
Acoustic Portrait
Several Acoustic Portrait parameters are controlled within GeniSys™ Display. To access the
Acoustic Portrait control screen within GeniSys™ Display; touch:
OPTIONS >> ACOUSTICS
.
From this control screen, Acoustic Portrait can be
turned on or off, the Acoustic Portrait selection may be
changed and the gain (volume) may also be adjusted.
To turn Acoustic Portrait on or off, touch the ON/OFF
button. The button will “toggle” the on or off status.
The gain is displayed in dB (decibels). The gain range
is adjustable from +6dB to minus 35dB. Minus 35dB
is the least amount of gain while +6dB is the most
amount of gain available. To change the gain value, touch the gain value button to highlight it
and then use the UP and DOWN buttons to change the gain value.
To change the active Acoustic Portrait selection, touch the Acoustic Portrait selection button
and use the UP and DOWN buttons to change to a different Acoustic Portrait selection. Once
the desired selection is displayed, touch the SET button. Loading takes approximately 3 to 4
seconds to complete.
17
