4.
Performance Player
The LD-34b contains a Performance Player which plays pre-recorded LDS Performances.
Note:
Additional LDS Performances cannot be added to the existing list of available
selections.
To access the Performance Player; touch:
OPTIONS >> AUTO PLAY >> PERFORMANCE PLAYER
.
To select a Performance song title, touch the
Performance song title to highlight it and then use the
UP and DOWN buttons to change the performance
title.
To begin playback, touch the PLAY button. To stop
playback, touch the STOP button.
To adjust the volume of a Performance, touch the
volume button to highlight it and then use the UP and
DOWN buttons to adjust the value.
Volume range is 1 (softest) through 10 (loudest).
Note:
Volume cannot be adjusted during playback.
5.
Capture Load/Save
GeniSys™ instruments can both save and load capture registration data to the USB flash
device. Capture registrations, piston configuration, MIDI settings, Crescendo/Tutti B settings
can be saved and loaded.
To access the Capture Save/Load feature, touch:
OPTIONS >> CONFIG CONSOLE >> CAPTURE SAVE/LOAD
.
The Capture Save/Load feature contains several
functions. Here is a quick breakdown of those functions
and what they do:
Mode Select:
LOAD, SAVE or DEL.
LOAD: Loads a selected capture file number.
SAVE: (4) options (Type Select):
“ALL” Saves all capture registrations, piston
configuration,
MIDI
settings,
Crescendo/Tutti B settings.
“MEM XX”
Saves only the selected capture memory level.
“PISTON CONFIG” Saves only the piston configuration data.
“CRESC/TUTTI B” Saves only the Crescendo/Tutti B data.
DELETE: Deletes the selected capture file number.
Select a Capture File:
To select a capture file to either save or load, touch the capture file number to highlight it, then
use the UP and DOWN buttons to select a file number.
Load a Capture File:
To load a selected capture file number, touch the LOAD button. Then, touch the ACT button to
start the load process. The display will indicate the status once completed.
Important!
If a selected capture file number is not located, the display will indicate the file
does not exist. Select a different capture file number to proceed.
23
