3-18
SECTION 3
SERVICE
049151; 07/08
33..88
B
Baatttteerryy JJuum
mpp SSttaarrtt
3.9
Battery Jump Start Procedures
Occasionally it may be necessary to jump start a weak battery. If jump starting is
necessary the following procedure is recommended to prevent starter damage,
battery damage, and personal injury.
Jump starting a battery incorrectly can cause the battery
to explode resulting in severe personal injury or death.
Do not smoke or allow any ignition sources near the
battery and do not start a frozen battery.
Electrical arcing can cause severe personal injury.
Do not allow positive and negative cable ends to touch.
1)
Use a battery of the same voltage (12V) as is used with your engine.
2)
Attach one end of the positive booster cable (red) to the positive (+) terminal of
the booster battery. Attach the other end to the terminal of your engine battery.
3)
Attach one end of the negative booster cable (black) to the negative (-)
terminal on the booster. Attach the other end of the negative cable to your
engine battery.
4)
Jump starting in any other manner may result in damage to the battery or the
electrical system.
Over cranking the engine can cause starter damage.
Allow 5 minutes for starter to cool if engaged for more
than 15 seconds.
When using lights or high amperage draw accessories,
idle the engine for a period of 20 minutes to bring the
battery to charge state.
Summary of Contents for 048986
