3-8
SECTION 3
SERVICE
049151; 07/08
33..44
C
Coonnttrrooll LLeevveerr A
Addjjuussttm
meenntt
3.4
Control Lever Adjustment Procedure
Be sure that the trowel is on a level surface. The control levers should line up evenly.
If levers appear out of adjustment they can be re-adjusted forward or backwards as
follows:
Trowel must be placed on flat level surface that
fully supports the blades on both rotors.
1)
Loosen nylock nuts
[A]
.
2)
Loosen jam nuts
[B]
.
3)
Extend linkage to adjust control levers backward.
4)
Shorten linkage to adjust linkage control levers forward.
5)
After levers have been adjusted to the desired position, re-tighten nylock
nuts
[A]
and jam nuts
[B]
.
Summary of Contents for 048986
