Allen Engineering Corporation 048986, Operations & Parts Manual

Page: 22 / 124

1-6
Section 1
SAFETY
049151; 07/08
1.3.1 Operating Safety
Familiarity and proper training are required for the safe operation of this equipment!
Equipment operated improperly or by untrained personnel can be dangerous! Read
the operating instructions contained in both this manual and the engine manual and
familiarize yourself with the location and proper use of all controls.
1.3.2 NEVER operate this machine in applications for which it is not intended.
1.3.3 NEVER allow anyone to operate this equipment without proper training. People
operating this equipment must be familiar with the risks and hazards associated with
it.
1.3.4 NEVER touch the engine or muffler while the engine is on or immediately after it has
been turned off. These areas get hot and may cause burns.
1.3.5 NEVER use accessories or attachments that are not recommended by AEC. Damage
to equipment and injury to the user may result.
1.3.6 NEVER operate the machine with the beltguard missing. Exposed drive belt and
pulleys create potentially dangerous hazards that can cause serious injuries.
1.3.7 NEVER leave machine running unattended.
1.3.8 DO NOT run the machine indoors or in an enclosed area such as a deep trench
unless adequate ventilation, through such items as exhaust fans or hoses, is
provided. Exhaust gas from the engine contains poisonous carbon monoxide gas;
exposure to carbon monoxide can cause loss of consciousness and may lead to
death.
1.3.9 ALWAYS remain aware of moving parts and keep hands, feet, and loose clothing
away from the moving parts of the equipment.
1.3.10 ALWAYS keep hands, feet, and loose clothing away from moving parts of the
machine.
1.3.11 ALWAYS read, understand, and follow procedures in the Operator’s Manual before
attempting to operate the equipment.
1.3.12 ALWAYS be sure operator is familiar with proper safety precautions and operation
techniques before using machine.
11..33
O Oppeerraattiinngg SSaaffeettyy