38
Rockwell Automation Publication PFLEX-AP005B-EN-P - May 2019
Chapter 1
Drive Selection Considerations
Figure 16 - PowerFlex 750-Series Frames 2…5
Typical Terminal Block Location and Termination Points
No.
Name
Description
1
Power Terminal Block
R/L1, S/L2, T/L3, BR1, BR2, +DC, -DC, U/T1, V/T2, W/T3
2
PE Grounding Studs
Terminating point to chassis ground for incoming AC line
and motor shields
3
PE-A and PE-B
MOV and CMC jumper screws
4
Optional NEMA/UL Type 1
Conduit Box
Terminating point to chassis ground for incoming AC line,
motor shields, and control wire shields
5
Optional EMC Plate
Terminating point to chassis ground for incoming AC line,
motor shields, and control wire shields
➊
➊
➊
➌
➊
➌
➋
➌
➍
➎
➋
➌
➋
➋
Frame 2
Frame 3
Frame 4
Frame 5
