Allen-Bradley 193-DNENCAT, User Manual, Page: 84 / 112

84 Rockwell Automation Publication 193-UM014C-EN-P - August 2016
Chapter 9 Device Parameters
Table 19 - Parameter 9 — Device Keys
Table 20 - Parameter 10 — Scanlist Config
Table 21 - Parameter 11 — ADR Record
Table 22 - Parameter 12 — ADR Enable
Table 23 - Parameter 13 — DNet IO RPI
Table 24 - Parameter 14 — DNet IO Inhibit
Description Access Rule Data Type Units
Value
Min. Max. Default
Determines how electronic
keying is performed.
Get/Set USIN T — 0 63 7
Bit
0 Device Type 2 Product Code 4 Minor Revision
1 Vendor 3 Major Revision 5 Minor of Higher
Description Access Rule Data Type Units
Value
Min. Max. Default
Triggers the building of a new
DeviceNet scan list.
0 = Ready
1 = Build Scan List
Get/Set BOOL — 0 1 0
Description Access Rule Data Type Units
Value
Min. Max. Default
Triggers the recording of configuration
parameters from devices in the
DeviceNet scan list to be used for
Automatic Device Replacement.
0 = Ready
1 = Record Parameters
Get/Set BOOL — 0 1 0
Description Access Rule Data Type Units
Value
Min. Max. Default
Enables Automatic Device Replacement.
0 = Disable
1 = Enable
Get/Set BOOL — 0 1 0
Description Access Rule Data Type Units
Value
Min. Max. Default
Defines the requested packet interval
rate in milliseconds used on DeviceNet
Polled I/O messaging.
Get/Set WORD ms 2 1000 75
Description Access Rule Data Type Units
Value
Min. Max. Default
Defines the inhibit time in milliseconds
used on DeviceNet Change of State
(COS) I/O messaging.
Get WORD ms 2 1000 1