Rockwell Automation Publication 1734-UM007E-EN-P - October 2015
43
Configure Modules in RSLogix 5000 Software
Appendix A
•
For Manual mode, click a value for Comparator Control 0 and 1 and
complete entries for Comparator Value 0 and 1, noting that in the
figure the value shows Up Direction for Comparator Control 0.
3.
Perform one of the following.
•
Click OK to save changes and close the dialog.
or
•
Click Cancel to return to default values.
or
•
Click Apply to save changes you made on any of the dialogs and
continue to display the dialog, noting that you enable the Apply button
when you make changes to any of the dialogs.
or
•
Click another tab at the top of dialog.
Comparator Control 0 and 1
Comparator Value 0 and 1
Automatic
Manual
Automatic
Manual
Not Active
Not Active
Up Direction
Down Direction
Both Directions
0...4294967295
with a default of 0