Rockwell Automation Publication 1734-UM007E-EN-P - October 2015
39
Configure Modules in RSLogix 5000 Software
Appendix A
Work with the Feedback
Dialog
Follow these procedures to complete entries for the Feedback dialog.
1.
From the General dialog, click Feedback to display the Feedback dialog.
2.
From the Feedback dialog, complete entries, referring to the table.
3.
From the Feedback dialog, complete one of these.
•
Click OK to save changes and close the dialog.
or
•
Click Cancel to return to default values.
or
•
Click Apply to save changes you made on any of the dialogs and
continue to display the dialog, noting that you enable the Apply button
when you make changes to any of the dialogs.
or
•
Click another tab at the top of dialog.
For more information on these parameters, refer to the definitions in Chapter 4
of this publication.
For
Select
Comments
Code Type
Binary or Gray
Default is Gray.
Word Length
2...31
Default is 13.
Data Speed
125 Kbps
250 Kbps
500 Kbps
1 MBps
2 MBps
Default is 125 Kbps.
SSI Word Delay Time
16...65535
Default is 64
μ
s.
SSI Word Filter Control
Max
High
Med
Low
Off
Default is Max.
SSI Clock
On or Off
Select On or Off to select the SSI clock.