manualshive.com logo in svg

Allen-Bradley 1734-IB8S, Installation & User Manual, Page: 6 / 156

Share
Download
Allen-Bradley 1734-IB8S Installation & User Manual Download Page 6

6

Rockwell Automation Publication 1734-UM013C-EN-P - August 2010

Table of Contents

Chapter 3

Install the Module

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  39
Environment and Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  41
Preventing Electrostatic Discharge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  41
Install the Mounting Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  42
Connect the Module to the Mounting Base. . . . . . . . . . . . . . . . . . . . . . . . .  43
Connect the Removable Terminal Block  . . . . . . . . . . . . . . . . . . . . . . . . . . .  45
Remove a Mounting Base  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  46
Wire Modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  46
Set the Node Address of a POINT Guard I/O Module . . . . . . . . . . . . . .  48
Reset POINT Guard I/O Modules to Out-of-box Condition . . . . . . . .  50
Auto-addressing with a 1734-PDN Adapter and POINT Guard I/O 
Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  51

Chapter 4

Wire the Module

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  53
Connection Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  53
Examples of Wiring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  55

Emergency Stop Dual-channel Devices  . . . . . . . . . . . . . . . . . . . . . . . . .  55
Dual-channel Safety Contactors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  57

Chapter 5

Power Supply Examples

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  59
POINTBus Backplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  59
Power Supply Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  60

Example 1: POINT Guard I/O Used with 1734-EP24DC for
Input, 1734-FPD for Output - 24V DC Only I/O. . . . . . . . . . . . . . .  61
Example 2: POINT Guard I/O Used with 1734-EP24DC for
Input and Output, Plus AC I/O  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  62

Observing Precautions for Safe Use  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  63

Chapter 6

Configure the Module in a 

GuardLogix Controller

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  65
Use Help  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  66
Add Modules to the
I/O Configuration Tree. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  66

Add and Configure the Ethernet Bridge Module  . . . . . . . . . . . . . . . .  66
Add and Configure the 1734-AENT Adapter . . . . . . . . . . . . . . . . . . .  69
Add and Configure Safety Input Modules. . . . . . . . . . . . . . . . . . . . . . .  72
Add and Configure Safety Output Modules. . . . . . . . . . . . . . . . . . . . .  78

Values and States of Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  85
Configure the Safety Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  86

Configuration Ownership . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  88
Configuration Signature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  88

Summary of Contents for 1734-IB8S





























































































































































Reviews:

No comments