Rockwell Automation Publication 1734-UM013C-EN-P - August 2010
123
Considerations When Replacing POINT Guard I/O Modules
Chapter
8
Scenario 3 - New Module SNN is Different from Original and
No Safety Signature Exists
1.
Remove the old I/O module and install the new module.
2.
Right-click your POINT Guard I/O module and choose Properties.
3.
Click the Safety tab.
4.
Click Reset Ownership.
5.
Click OK.
6.
Follow your company-prescribed procedures to functionally test the
replaced I/O module and system and to authorize the system for use.