ALLEN & HEATH QU-PAC Getting Started Manual Download Page 5

Page: 5 / 27

Qu-Pac

Getting Started Guide

AP9815 iss2

Contents

Packed contents .............................................................................................................................. 4

Contents .......................................................................................................................................... 5

Introduction...................................................................................................................................... 6

Installing Qu-Pac ............................................................................................................................. 7

Rear Panel ....................................................................................................................................... 8

Front Panel .................................................................................................................................... 10

Audio Signal Processing ................................................................................................................ 12

Operating Principles ...................................................................................................................... 13

8.1

Mixing using the Front Panel Controls .................................................................................. 13

8.2

Mixing using Wireless Control ............................................................................................... 15

8.3

Qu-Control ............................................................................................................................ 17

Qu-Start ......................................................................................................................................... 18

10.

Resetting the Mixer ........................................................................................................................ 25

10.1

Reset Mix Settings – A starting point for mixing .................................................................... 25

10.2

System Hard Reset ............................................................................................................... 26

About this guide

This is the Getting Started Guide for the Allen & Heath Qu-Pac rack

mount digital mixer.

For more information about Qu-Pac setup and mixing functions please

refer to the

Qu Mixer Reference Guide

available for download from

the Allen & Heath website:

www.allen-heath.com

Please Note

This guide refers to Qu firmware

V1.7

. Please refer to the Allen &

Heath website for the latest version of firmware and this guide.

For information on the

AR2412

AR84

and

AB168

remote AudioRacks

please refer to their user guides.

Summary of Contents for QU-PAC




























Search results

Summary of Contents for QU-PAC

Reviews:

Related manuals for QU-PAC

Brands by name

Popular brands

ALLEN & HEATH QU-PAC, Getting Started Manual

Search results

Summary of Contents for QU-PAC

Reviews:

Related manuals for QU-PAC

Brands by name

Popular brands