15
Fig. 14c The second phase of earthworks . Pool positioning
Main drain connection:
1.If it is possible to drain water from
the pool, connect a pipe to the drain
outlet and do do it before loading the
pool into the pit.
2.
If not possible, glue the plug.
3. Also, you can connect to the water
filling inlet in it, and then filling the
pool and the addition will be easy for
you to adjust with the valve installed
in a convenient location.
Skimmer overflow outlet connection:
1. The skimmer is equipped with a high water level drain
outlet.
2. On the back of the pool (next to the skimmer) you
will find a PVC pipe d25 left for connection
3. Connect the pipe to drainage rainwater or, if not
feasible, lower the pipe down to the drainage crush
layer around the pool.
Summary of Contents for CITYPOOL
