13
6. Swimming pool equipping and levelling
Adjust swimming pool horizontality (Fig. 11) using laser or optikal level and checking the
position of the swimming pool in the defined points, layout and zero point (Alt. 0.00).
Fig. 12 The second phase of earthworks. Level setting.
Make sure that the bottom of swimming pool is in full contact with the ground with its entire
surface; make sure that the pool does not deviate from the axes in the soil, which you established.
Fig. 13 Pool positioning by axis
If a difference in level appears, do not apply pressure and jump on the curb of the pool. The
pool must be pulled out, the compacted sand must be checked and the positioning of the pool in the
bottom of the excavation.
Attention!
Never lift the pool to ensure the levelling regarding the zero point. In fact, the bottom, if it does not
rely on its entire surface, may ultimately result in the gelcoat layer cracks due to water pressure…
9
Summary of Contents for CITYPOOL
