24
8
Press
2.
CALL
/
MONI
key to choose No.26 menu, LCD displays"DSP—
FR".
Turn selector knob to select the desired
3.
mode.
FR: FrMemory mode.
CH:Channel mode.
NM:Name Tag mode,if channel
not named,it displays FrMemory
mode.
Press
4.
TS/DCS
key to confirm and exit.
PIN Setup(
Useless if PIN is not assigned
)
Enable this function,you have to insert a matching PIN to enter into
normal status when radio is turned on.(The PIN can be assigend by
programming software only.)
Press and hold
1.
key for over 2s to
enter setting menu.
Press
2.
CALL
/
MONI
key to choose No.27
menu, LCD displays "
CODE-OF
".
Turn selector knob to enable/disable Pin
3.
setup.
ON: Turn on Pin setup
OFF:Turn off Pin setup
Press
4.
TS/DCS
key to confirm and exit.
This function may not be available in dealer-programmed units.
General Setting
Address list
You store desired ID and corresponding ID name in address list.The
LCD displays ID corresponding name if radio received ANI calling and
find matching ID in address list .
RESET
If your radio seems to be malfunctioning, resetting the microprocessor
may solve the problem. When performing the reset, you may lose
memory data and stored information. Back up or write down important
data before performing the reset.
Press and hold
1.
key for over 2s to
enter general setting menu.
Press
2.
CALL
/
MONI
key to choose No.28
menu, LCD displays"BOOK".
Press
3.
MHz
to enter into ID setting,press
CALL
/
MONI
t o s e l e c t t h e d e s i r e d
group (00-127,total is 128 group ID).
Turn selector knob to select desired
number,press
TS/DCS
confirm and move
cursor to next edition,press to
clear out all digits.
After finishing edition,press to confirm and enter into edition of
4.
current group's ID corresponding name.Turn selector knob to select
desired letter,press to move cursor to next edition,Press
to clear out all letters. 00-127,total 128 group ID and corresponding
ID name.
Press to confirm and return into main menu.Repeat above
5.
Step 3 and Step 4 operations to edit multi-ID and corresponding ID
name.
Press
6.
TS/DCS
key to return into standby status.
MHz
TS/DCS
