20
8
Busy Channel Lockout
BCLO is to disable transmitting while RX signal is received. Once the
channel is busy and you press PTT, the radio will beep as warning and
get back to receiving.
Press and hold
1.
key for over 2s to
enter setting menu.
Press
2.
CALL
/
MONI
key to choose No.10
menu, LCD displays"LOCK--OFF".
Turn selector knob to select the desired
3.
setting.
BU: Enable
BCLO, Carrier lockout, transmitting is inhibited when
current channel receives a matching carrier.
RL: Enable
BTLO, transmitting is inhibited when current channel
receives a matching carrier but dis-matching CTCSS/DCS.
OFF:
Busy channel lockout is disabled.It can transmit in any
receiving status.
Press
4.
TS/DCS
key to confirm and exit.
In memory-mode, press and hold
1.
key for over 2s to enter setting menu.
Press
2.
CALL
/
MONI
key to choose No.11
menu, LCD displays cursor and flashing.
Turn selector knob to select the desired letter,press
3.
TS/DCS
key to
confirm selected letter and enter into next edition,Press to
return forward edition.
After edition,press
4.
MHz
key to exit.
Reverse TX/RX
Editing Channel NAME
In Frequency (VFO) mode, this function will be auto-hidden.
TX frequency turns to RX frequency & RX frequency changes to TX
frequency. CTCSS/DCS setting is respected also.
Press and hold
1.
key for over 2s to enter setting menu.
Press
2.
CALL
/
MONI
key to choose No.12
menu, LCD displays "
REV—OF
".
Turn selector knob to select the desired
3.
setting.
ON:Enable Frequency Reverse
OFF:Disable Frequency Reverse.
Press
4.
TS/DCS
key to set and exit.
Turn selector knob to select the desired
3.
setting .
On:In current channel,Press PTT to
transmit
OFF:In current channel,Press PTT is
invalid.
4
. Press
TS/DCS
key to confirm and exit.
(Available only in Memory mode)
