12
Basic Operations
Transmitting Tone BURST TONE
Transmitting OPTIONAL SIGNALING
Press and hold [PTT] key, then press Microphone [
] key to
transmit current selected tone-pulse signal.
Press and hold [PTT] key, then press Microphone
key or press
CALL
key in front panel or press Mic's
key to transmit pre-stored and
selected DTMF/2Tone/5Tone optional signaling. Details will follow.
MEMORY CHANNEL PROGRAMMING
MEMORY CHANNEL DELETING
Under frequency mode (VFO), turn
1.
selector knob to select the desired
frequency or input frequency by MIC's
numeric keys.
Press
2.
TS/DCS
key to enter CTCSS/DCS
signaling setup, turn selector knob to
select the desired signaling.
Under Memory mode, turn selector knob to select channel to be
1.
deleted.
Press
2.
key and
key together, current memory will be
deleted beep sounds.
icon flashing means current memory is
deleted.
Press
3.
key, LCD appears ,
icon and current channel number,
icon flashing means current channel is empty.
Turn selector knob to select the desired channel number to store.
4.
Press
5.
key, , icon and channel number disappears and
beep sounds.
Press
6.
V/M
key again to confirm that the memory channel is properly
stored.
6
While transmitting, LED lights RED and TX-meter shows relative power level.
Release PTT to receive.
Please hold the microphone approximately 2.5-5.0cm from your lips
, and
then speak into the microphone in your normal speaking voice.
