49
The sequence number will consist of a maximum of 16 presets. Each tour or
cruise will have to be given a different sequence number. Each preset can be
allocated a dwell speed and dwell time. The dwell time is the time the presets
waits before starting a move to the next preset. The dwell speed is the speed
taken to move from a preset to the next preset.
Press the add button to add the presets in this sequence. When all details have
been entered press Confirm to save the sequence. To test sequence press the
StartSeq button and if running okay press the Stop button. This menu allows
you to delete presets. After completing setup press Return to go back to PTZ
menu then press Confirm to save all changes.
NOTE: This option will only work on PTZ units that have the features
available.
Returning to the PTZ menu the following menu is displayed when clicking on
Cruise Setup. This function is used to setup a pattern.
RecCru
Press the RecCru button and you will enter the PTZ control interface. Control
the PTZ using the keys and press the Enter button to save the pattern and
return to the Set Cruise menu.
StartCru
This will allow you to check the pattern so press Stop to end.
Press Return button to return to |PTZ menu and in the PTZ menu press
Confirm to save the pattern.
NOTE: This option will only work on a PTZ that has the pattern function
available.
