48
Data Bits/Stop Bits/Parity/Flow Control
These need to be set for the appropriate PTZ camera.
Protocol
Select the necessary protocol used by the PTZ. There is a large list of
protocols from which to select.
PTZ Addr
Set each camera with a different address. It is easier to use the same camera
channel number. Ensure this address is set in the PTZ camera. This is
normally set by dipswitches in the camera.
Preset
Select the preset setup button and the following menu will be displayed:
Preset
This allows the setting of preset numbers. Enter the preset number and press
the Adjust button. Using the PTZ adjustment control, set the preset position
and Save, then press the Return button. This will take you back to the PTZ
menu.
Sequence No:
This will allow you to create a tour sequence number. The following menu
will be displayed: