ALGE-Timing OPTIc3, Manual

Page: 61 / 121

Manual
Photo Finish OPTIc3
- 61-
Adjustment for the Start Time Transmission from Mobile Timing MT1
To read the time stamp of a MT1 start impulse you need an internet connection of your OP-
TIc3-PC. You have to start the program “MT1 Time.Net Connector”
and make sure that
you receive the MT1 start impulses (C0) there.
In the ATL settings
(third icon on top from the
left) the red marked adjust-
ments must be made that
start times sent from the
MT1 will be registered by
the OTPIc3.
Once these adjustments
are done, you will receive
the start time stamps of
the MT1 in the OPTIc3.
Mass Start for a Race:
When selecting in the tim-
ing window it will start a
race.
Single Start for Racers:
When you select in the
timing window it will give
the racer with the transmit-
ted ID-number from the
MT1 a start time in the ac-
tive race.