ALGE-Timing OPTIc3 Manual Download Page 59 | Manualshive

Page: 59 / 121

ALGE-Timing OPTIc3 Manual Download Page 59

Manual

Photo Finish OPTIc3

- 59-

Display time

The time also shown on the display board is output here (if you selected the running time and
not the time of day in the tool bar).
You can adjust three different modes:

Standard:

The display board stops after a stop impulse.
The blue bar that shows <Display time>
changes its color to red. If you click on this red
bar the time on the display board starts to run
again.

Automatic:

The display board stops after a stop impulse for
the duration of the <Hold time> (adjustable in
Menu <Connection>). The blue bar that shows <Display time> changes its color to red. If you
click on this red bar the time on the display board starts to run again.

Continuous:

The display board does not stop after a stop impulse. It shows a continuous running time. This
is useful e.g. for cycling or long distance running races.

10.1 Tool Bar of the Timing Window:

Motion Detection

When you activate the <Motion Recording> it automatically records a photo finish when the
picture is changing. More information in chapter 10.2.5 Motion Detection.

Motion Detection to Display Board

When you activate the <Motion Detection to Display Board> the time of the display board stops
with impulses of the motion detection. This function is only possible if <Motion Detection > is
activated.

Test Start (C0)

When you activate <Teststart> in a heat the start is recorded. For track and field events accord-
ing to IAAF rules it is mandatory to execute a test start before the meeting to prove that the
timing device starts exactly at zero. You can find further information under point 5.3.1 Zero Con-
trol for Track and Field (Start Control).

Startimpulse from TED

If the start pulse comes via an external radio system (e.g. Teledata TED), you must activate
. Thus, an error correction for the radio transmission of 0.1 s is performed internally.

Attention:

If the internal radio "WTN" is used in the OPTIc3 you do not have to activate

. The

error correction is done automatically from the OPTIc3 system.

«
...
57
58
59
60
61
...
»

Summary of Contents for OPTIc3


























































































































Reviews:

No comments