Manual
Photo Finish OPTIc3
- 33-
7.4
WTN Radio Adjustments
(OPTIc3-PRO)
The OPTIc3-PRO camera has a built in WTN radio system. WTN is a wireless timing network
created by
ALGE-TIMING
with which you can receive start or finish impulses or control display
boards. More information about the WTN functions are described in the WNT manual.
k ...... WTN on:
Activate WTN to use the integrated radio
system.
k1 .... Team:
All team member must have set the same
team.
k2 .... Power
The radio power can be adjusted between
10 and 100 mW. In the EU only 10 mW are
allowed. Please check if you are allowed to
use higher power in your country before us-
ing it.
k3 .... New WTN List:
Renews the list of WTN devices that are
connected to the OPTIc3.
k4 .... WTN-Device List:
Shows all WTN devices connected in the adjusted TEAM to the OPTIc3.
7.5
Voice Communication - VoIP
(OPTIc3-PRO)
You can use the PC for communication with the starter or other timing assistants. Connect the
speech amplifier SV4-S or Start Unit SU3 and headset HS3-2 with the starting line. You can
then use a VoIP connection to communicate with the PC user. For this, you either use PC
loudspeaker and microphone or a connected headset.
o
Phone on:
activate for VoIP communication
p
Adjustments:
If you click on this button further
settings appear. If you have a VoIP
connection the button turns green.
q Call mode:
connect or test
r
Make call:
start speech connection
s
End call:
stop speech connection
t
Status message:
communication information
Summary of Contents for OPTIc3
Page 1: ...Version E220509 Manual Photo Finish OPTIc3 ...
Page 118: ...Manual Photo Finish OPTIc3 118 ...
Page 119: ...Manual Photo Finish OPTIc3 119 ...
Page 120: ...Manual Photo Finish OPTIc3 120 ...