29
The work surface must be in horizontal position when the lower pull out section is adjusted to the mounting
panel width. Undo the clamping lever and adjust the adapter plates to the required width. The adapter
plates must be positioned so that the screwed in head screw is level with the inside of the U profile of
the mounting panel. Tighten the clamping lever after adjusting the width. Screw in the head screws now.
The work surface must be in horizontal position when the upper pull out section is adjusted to the mounting
panel width. Undo the clamping lever and adjust the adapter plates to the required width. The adapter
plates must be positioned so that the retracted stop bolts are level with the U profile on the inside of the
mounting panel.
To tighten the clamping lever after adjusting the width, pull the stop bolt back and turn left to fix the
mounting panel. The stop bolt is now retracted. Fit in the mounting panel now and turn the stop bolt back.
The stop bolts are retracted and the mounting panel is fixed.
Figure 10: work surface and its adjustment modes
Figure 11: tilting work surface
The work surface can be adjusted to the required position now.