alfen Eve Single Pro Series, Manual, Page: 9 / 35

9
Eve Single manual | Version 4.2 | December 2021
ENGLISH
2. PRODUCT
2.2.2 Status indications on Pro-line models
General information on charging station
1
The charge point ID: Identification is determined by
the reseller or maintainer of the central management
system. You can, for example, use this ID to convey to
a helpdesk for which charging point you need support.
2
Date and time: these are set through a maintenance
system (automatically) or during installation, using the
Service Installer application. If the product does not
have a current time, this field is invisible.
Status and information screen
Status and information screen: the charging station informs
the user of its current status
and provides the user with a response to the actions
performed. The following information is available:
3
Status information
4
Status indicator (symbols, see figure 2)
5
Current charging capacity to the connected
vehicle
6
Maximum charging capacity of the outlet
7
Energy picked up during the current transaction
8
Duration of the current transaction
Instruction field
9
Usage instructions will be displayed in this location.
Where an error occurs, an error code and instruction will
be shown (see Appendix A for more information).
Stand by, ready
to use
Charge card accepted,
cable connected
Communicating with
vehicle or charging
complete
Charging transaction
active
Status indicators during smart EV charging (load balancing)
The Eve Single S-line will indicate activated smart charging features e.g. load balancing (for more information, s
ee Appendix B) in the following way:
Load balancing off
Load balancing activated:
reduced charging
Load balancing activated:
charging paused
LED
LED
LED
Status indications for errors
Any user error or fault will be indicated by a red LED status.
The charging station detected
an error. Contact our service
department.
Charge card presented is not authorised for
charging. Charging cable is connected but
no charging is happening
2.2 User interface
The Eve Single has two different versions: The S-line with a Status LED and the Pro-line with a colour display. Both versions
inform the user on the progress of the charging by using status indications.
2.2.1 Status indications on S-line models
General status indications
Charge card accepted,
cable connected
Communicating with vehicle
or charging complete
Error, notification with error
code
Charging transaction
active, with charging speed
indication
--kW
--kW
--.--kWh
--.--h
22/01/2019 12:30
Hold the charge card in front of the
reader to stop
Your vehicle is being charged...
22kW
01:23 am
18.1kW
22.67kWh
2
1
3
4
6
5
7
8
9
ALFEN
Figure 1: Display of Eve Single Pro-line during charging Figure 2: Symbols status indicator
S-line (page 2) Pro-line (page 3)
Exterior view Exterior view
1
Colour display
2
RFID card reader (optional S-line)
2
RFID card reader
3
Type 2 socket (shutter optional) or plug holder
3
Type 2 socket (shutter optional) or plug holder
4
RGB Status LED
Interior view Interior view
5
UTP (Ethernet) connector
5
UTP (Ethernet) connector
6
RJ11 connector
6
RJ11 connector
7
-
7
SIM cardholder
8
Terminal block for the power supply
8
Terminal block for the power supply
9
Clamps for outbound charging cable (model without
outlet)
9
Clamps for outbound charging cable (model
without outlet)
10
a. Screws for wall-mounting frame
10
a. Screws for wall-mounting frame
10
b. Screws for wall-mounting frame with earth
connection
10
b. Screws for wall-mounting frame with earth
connection
11
Screws for front cover
11
Screws for front cover
Bottom view Bottom view
12
Identification label
12
Identification label
13
Cable screw connection (cable gland) for the power
supply
13
Cable screw connection (cable gland) for the power
supply
14
Cable screw connection (cable gland) for charging
cable
14
Cable screw connection (cable gland) for charging
cable
15
Wall-mounting frame
15
Wall-mounting frame
16
Grommet for UTP cable/Ethernet cable
16
Grommet for UTP cable/Ethernet cable
17
Grommet for P1 cable
17
Grommet for P1 cable