alfen Eve Single Pro Series, Manual, Page: 32 / 35

32
Eve Single manual | Version 4.2 | December 2021
ENGLISH
APPENDIX B: DEFAULT SELECTIONS FOR
OPTIONAL FACTORY SETTINGS
Network choice Per charging station OCPP settings
Smart Charging Network with OCPP GPRS SCN ON
OCPP Management System Selection
for GPRS
Smart Charging Network with OCPP GPRS SCN ON OCPP Management System selection for UTP
Smart Charging Network with OCPP through
external GPRS router
SCN ON OCPP Management System selection for UTP
Electrical supply (local installation) See chapter 2.7, always set to full power per charging station.
Settings Factory settings: set for charging station (max output)
• If the functionality was purchased. The charging station will not be part of the SCN if you have not purchased this
functionality. After you receive confirmation for your purchase of this functionality by Alfen, the new functionality can
be downloaded using the Service Installer application.
NOTICE!
After setting up a Smart Charging Network, all newly added charging stations will need to reboot. After rebooting, the
charging stations will log in to the Smart Charging Network.
About OCPP
The functionalities of the SCN are available through the UTP/Ethernet connection of the charging stations. This can easily
be combined with communication over OCPP, through UTP/Ethernet or GPRS. Note that you need one SIM card per charging
station. To limit costs, you can also use a router and a (2G/3G/4G) modem. In that case, the charging stations should be set
to communicate with a wired network. The router is then set for the (secure) APN of the relevant management system.
How to set up