Alfa Romeo MiTo 2013, Owner'S Handbook Manual

Page: 164 / 312

Subwoofer and "Fix&Go Automatic Kit"
Locating the Automatic Fix&Go Kit:
❒
open the luggage compartment, pull tab A fig. 113 and lift up the
mat;
❒
take the “Fix&Go Automatic Kit” located on the left side of the
luggage compartment ( fig. 123);
❒
inflate the wheel (see paragraph entitled “Fix&Go Automatic Kit”).
REFITTING THE WHEEL
Following the procedure described previously, raise the car and
remove the small spare wheel.
Proceed as follows:
❒
make sure the contact surfaces between standard wheel and hub are
clean so that the fastening bolts will not come loose;
❒
for versions with steel rims : fix the hub cap on the rim,
aligning the crescent hole with the bolt you have fitted, then insert
the other 4 bolts;
❒
tighten the retaining bolts using wrench A fig. 117;
❒
lower the car and remove the jack;
❒
use wrench A fig. 117 to fully tighten the bolts, following the
sequence illustrated in
❒
for versions with alloy rims with hub cap : align the pin on
the cap with the housing on the rim.
At the end of operation
❒
stow the space-saver spare wheel in the compartment provided in
the boot;
❒
insert the jack and the other tools in the container;
❒
arrange the container and tools on the space-saver wheel;
❒
correctly reposition the boot mat.
fig. 123
A0J0239
160
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX