Alfa Romeo MiTo 2013, Owner'S Handbook Manual

Page: 33 / 312

MENU ITEMS
Menu
This option allows you to access the Setup Menu. Press the "+" or "-"
button to select the various Menu options. Hold down the MENU
ESC button to return to the standard screen.
Speed Beep (Speed limit)
This function may be used to set the car speed limit (km/h or mph);
when this limit is exceeded the driver is alerted.
To set the desired speed limit, proceed as follows:
❒
briefly press the MENU ESC button to make the display show the
words (Speed Beep);
❒
press the "-" or "+" button to select speed limit activation (On) or
deactivation (Off);
❒
when the function is activated (On), press the "+" or "-" buttons to
select the desired speed limit and press MENU ESC to confirm the
choice.
IMPORTANT Setting is possible between 30 and 200 km/h, or 20 and
125 mph, according to the previously set unit. See the "Measurement
unit (Measurement unit adjustment)" paragraph described below.
The setting will increase/decrease by 5 units each time the +/- button
is pressed. Hold down the +/- button for fast automatic increase/
decrease. Complete the setting by with single presses of the button
when you approach the required value.
❒
Press the MENU ESC button briefly to return to the menu screen or
hold the button down to return to the standard screen without
storing.
To cancel the setting proceed as follows:
❒
briefly press MENU ESC: (On) will flash on the display;
❒
press the - button to make the display flash (Off);
❒
press the MENU ESC button briefly to return to the menu screen or
hold the button down to return to the standard screen without
storing.
Headlight sensor (Automatic
headlight/dusk sensor sensitivity
adjustment)
(for versions/markets, where provided)
This function enables the headlights to come on or go off depending on
external lighting conditions.
The dusk sensor sensitivity can be adjusted according to 3 levels (level
1= minimum sensitivity, level 2= average sensitivity, level 3= maximum
sensitivity).
The higher the sensitivity set, the lesser is the external light variation
needed to switch the lights on (e.g. with a setting on level 3 at sunset
the headlights come on in advance in relation to levels 1 and 2).
Proceed as follows to set the desired adjustment:
❒
press the MENU ESC button briefly to make the display flash the
previously stored level;
❒
press the + or - button to select;
❒
briefly press the MENU ESC button to return to the menu screen or
hold it down to return to the standard screen without storing.
29
GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX