Alfa Romeo MiTo 2013, Owner'S Handbook Manual

Page: 34 / 312

Rain sensor (Rain sensor sensitivity
adjustment)
This function allows you to adjust the rain sensor sensitivity to 4 levels.
To set the required sensitivity level proceed as follows:
❒
briefly press MENU ESC: the previously set sensitivity level will flash
on the display;
❒
press the + or - button to adjust;
❒
press the MENU ESC button briefly to return to the menu screen or
hold the button down to return to the standard screen without
storing.
Activation/Trip B data (Trip B
enablement)
This function may be used to activate (On) or deactivate (Off) the Trip B
(partial trip). For further information see “Trip computer”.
Proceed as follows to switch the function on and off:
❒
press the MENU ESC button briefly to make the display flash On or
Off according to the previous setting;
❒
press the + or - button to select;
❒
press the MENU ESC button briefly to return to the menu screen or
hold the button down to return to the standard screen without
storing.
Time adjustment (Clock adjustment)
This function enables the clock to be set through two sub-menus:
“Time” and “Format”.
To carry out the adjustment, proceed as follows:
❒
briefly press MENU ESC: the display will show the two submenus
“Time” and “Mode”;
❒
press the + or - button to move between the two submenus;
❒
once the submenu to be modified has been selected, briefly press the
MENU ESC button;
❒
when you select the “Time” submenu, pressing MENU ESC briefly
makes the "hours" flash on the display;
❒
press the + or - button to adjust;
❒
briefly press MENU ESC: the “minutes” will flash on the display;
❒
press the + or - button to adjust.
IMPORTANT Each press on the + or - buttons causes an increase or
decrease of one unit. Hold down the button to increase/decrease the
setting rapidly and automatically. Complete the setting by with single
presses of the button when you approach the required value.
❒
If you select “Format” submenu, pressing MENU ESC briefly makes
the display mode flash on the display;
❒
press + or - to select “24h” or “12h”.
When you have made the required adjustments, briefly press button
MENU ESC to go back to the submenu screen or hold the button down
to go back to the main menu screen without saving.
❒
hold the MENU ESC button down again to go back to the standard
screen or to the main menu according to the position in the menu.
30
GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX