GETTING TO KNOW YOUR VEHICLE
23
Power Window Switch
Push/pull the corresponding buttons to open/
close the desired window.
When one of the two buttons is pushed/pulled
briefly, the window moves in stages.
Automatic Operation
This is activated by pushing one of the two
buttons down for longer than one half second.
The window will stop when it is fully opened, or
when the button is pushed again.
It can be used on both the driver side and
passenger side, only for lowering the window.
Electric Window System Reset
After a break in power supply for the control
units (battery replaced or disconnected or
protective fuses for the electric window control
units replaced), the automatic operation of the
windows must be restored.
The restoration procedure must be performed
as described below with the doors closed:
1. Completely open the driver's door window
keeping the operating button pushed for at
least three seconds after the (lower) end of
travel position is reached.
2. Completely raise the driver side window and
hold the button down for at least three
seconds once the (upper) end of travel
position has been reached.
3. Proceed in the same way as described in
the first two steps for the passenger side
door.
4. Make sure that the reset is correct by
checking that the windows work automat
-
ically.
WARNING!
Improper actuation of the power windows may
be dangerous. Never leave children
unattended in a vehicle, and do not let children
play with power windows. Before and during
window operation make sure no one and no
object (including clothing) is in the path of the
moving glass or its mechanism. Do not leave
the Key Fob in or near the vehicle, or in a
location accessible to children. Occupants,
particularly unattended children, can become
entrapped by the windows while operating the
power window switches. Such entrapment may
result in serious injury or death.
2
20_4C_OM_EN_USC_t.book Page 23
Summary of Contents for 4C Spider 2020
Page 162: ......
