124
SERVICING AND MAINTENANCE
Checking Brake Fluid
To check the brake fluid level, proceed as
follows:
1. Loosen the two screws and remove the
brake fluid protection panel.
Brake Fluid Protection Panel
2. Check that the fluid is at the max. level.
3. After checking, reposition the brake fluid
protection panel and tighten the two
screws.
Adding Brake Fluid
If the fluid level in the reservoir is not sufficient,
proceed as follows:
1. Take the black funnel for topping up the
brake fluid and its extension pipe from the
service kit in the luggage compartment.
2. Loosen the reservoir plug and introduce the
funnel with the extension pipe in the
reservoir inlet.
Brake Fluid Funnel
3. After topping up, remove the funnel with the
extension pipe.
4. Tighten the reservoir plug.
5. Reposition the brake fluid protection panel
and tighten the two screws.
NOTE:
Be very careful while removing the plug from the
opening to prevent the plug from falling inside
the vehicle body.
A
LFA
T
WIN
C
LUTCH
T
RANSMISSION
Selection Of Lubricant
It is important to use the proper transmission
fluid to ensure optimum transmission
performance and life. Use only the
manufacturer’s specified transmission fluid.
Refer to “Fluids And Lubricants” in “Technical
Specifications” for fluid specifications. It is
important to maintain the transmission fluid at
the correct level using the recommended fluid.
No chemical flushes should be used in any
transmission; only the approved lubricant
should be used.
1 — Brake Fluid Protection Panel
2 — Washer Solvent Protection Panel
1 — Screw Locations
20_4C_OM_EN_USC_t.book Page 124
Summary of Contents for 4C Spider 2020
Page 162: ......