36
GETTING TO KNOW YOUR INSTRUMENT PANEL
For activation/deactivation, proceed as follows:
1. Briefly push the SET/BACK button. “On” or
“Off” will display in the instrument cluster
display (according to previous setting).
2. Push and release the up or down arrow
button to select the setting and once
selected a beep will occur to signal the
setting is saved.
3. Briefly push the SET/BACK button to go
back to the menu screen, or push and hold
the SET/BACK button (approximately one
second) to go back to the main screen
without storing the settings.
Set Time
This function may be used to set the clock
through two submenu items: “Time” and
“Mode.”
Proceed as follows:
1. Briefly push the SET/BACK button. The
display will show the two submenu items
“Time” and “Mode.”
2. Push and release the up or down arrow
button to navigate the two submenu items.
3. Select the required option and then push
the SET/BACK button.
4. When accessing the “Time” submenu item,
briefly push the SET/BACK button and
“hours” will flash on the display.
5. Push and release the up or down arrow
button for setting.
6. Briefly push the SET/BACK button and
“minutes” will flash on the display.
7. Push and release the up or down arrow
button for setting.
NOTE:
The setting will increase or decrease by one
unit each time the up or down arrow button is
pushed. Push and hold the up or down arrow
button to increase/decrease the setting
rapidly. Save the setting by briefly pushing
the button when you approach the required
setting.
Briefly push the SET/BACK button to return to
the “Time” sub-function.
When accessing the “Mode” submenu,
briefly push the SET/BACK button. The previ
-
ously set display format will flash on the
display.
Push and release the up or down arrow
button to select “24h” or “12h.”
When you have selected the required settings,
briefly push the SET/BACK button to go back to
the Time, Mode submenu screen, or push and
hold the SET/BACK button (approximately one
second) to go back to the main screen without
storing the settings.
Set Date
This function may be used to set the date (day -
month - year).
To change the date, proceed as follows:
1. Briefly push the SET/BACK button and
“year” will flash on the display.
2. Push and release the up or down arrow
button for setting.
3. Briefly push the SET/BACK button and
“month” will flash on the display.
4. Push and release the up or down arrow
button for setting.
5. Briefly push the SET/BACK button and
“day” will flash on the display.
6. Push and release the up or down button for
setting.
NOTE:
The setting will increase or decrease by one unit
each time the up or down arrow button is
pushed. Push and hold the up or down arrow
button to increase/decrease the setting rapidly.
Save the setting by briefly pushing the button
when you approach the required setting.
Briefly push the SET/BACK button to go back to
the menu screen, or push and hold the SET/
BACK button (approximately one second) to go
back to the main screen without storing the
settings.
20_4C_OM_EN_USC_t.book Page 36
Summary of Contents for 4C Spider 2020
Page 162: ......