Alfa Laval Unique PMO Plus, Instruction Manual

Page: 23 / 80

21 Effective 11/1/07, Revised 1/1/09, Revised 8/1/09
Unique PMO Plus ® Series Sanitary Mixproof Valve Instruction Manual
Actuate the
valve to
open position
Do Not
Actuate the
valve to
upper seat lift
Actuate the
valve to
lower seat lift
Set Open Position
I Bypass
Move to next step
II Store Position
II Disable function
(LED B lashing)
Press I
to bypass
move to
next step
Set Upper Seat Lift
I Bypass
Move to next step
II Store Position
II Disable function
(LED B lashing)
Press I
to bypass
move to
next step
Press I
to bypass
move to
next step
LED D, B steady
if open position enabled
LED D steady, B flashing
if open position disabled
Hold for
5 s.
Hold for
5 s.
LED D, C, B steady
if upper seat lift enabled
LED D, C steady, B flashing
if upper seat lift disabled
LED D, C, A steady
if lower seat lift enabled
LED D, C steady, A flashing
if lower seat lift disabled
Hold for
5 s.
Step 4 Step 5 Step 6
See opposite page
See opposite page
Notes: I - Scroll across, no change
- Notes Requires Key Function
- - Notes Automatic Progress as Indicated
4. [D] IND active during set-up.
- Flashing in step 1,
- Steady in all other steps.
or during operations, error condition
- Steady showing hardware fault
- Flashing showing software fault
5. Timeout: A 60 second time-out is started as soon as any button(s) are released.
If no button is pressed during the time-out time, go to normal condition (cancel & exit).
LED B "Open valve" (Yellow)
LED D "Setup/Internal fault" (Red)
LED C "Seat-lift 1/2" (Yellow)
LED E "Solenoid valves" (Green)
LED F "Maintenance" (Orange)
LED A "Closed valve" (Yellow)
Think Top ® Visual Indications LED Indications
Setup diagram
General: 1. Flashing IND means no value set.
Steady IND means value set as shown.
2. Default is: Step 2, Type 0 (+/- 5 mm)
Step 3-8 disabled
3. Lamp Status Shown in [ ]
See opposite page
Enter
Set-up Sequence
I
LED D steady,
then lashing
See opposite
page
Think Top ® setup utilizing local 'I' and 'II' Keys
Set Lower Seat Lift
I Bypass
Move to next step
II Store Position
II Disable function
(LED A lashing)