4 Installation
4.1 Unpacking, Handling and Storage
S
Stteepp 11
Always ensure any personnel undertaking lifting operations have the suitable experience and training to do so safely.
Always ensure any lifting equipment used is in good condition and has been suitably tested, using lifting logs when applied.
Always refer to the pump weights guide (Section 6) and ensure any lifting equipment used is rated for and used within
the load limits.
Always ensure that the lifting points are in line with the centre of gravity and adjust lifting point if necessary.
Always keep an eye on the load and stay clear during the lifting operation.
The diagram below show examples of how the equipment can be lifted, however the user is to ensure this can be done
safely with the equipment at hand:
Pump with drive unit
Bareshaft pump
3205-0050
3205-0001
S
Stteepp 22
On receipt always:
- Check the delivery note against the goods received.
- If motorised, check that the drive instructions are available.
- Be careful not to discard any manuals that may be enclosed with the packaging.
- Inspect the packing for signs of damage in transit.
- Carefully remove the packing away from the pump.
- Inspect the pump for any visible signs of damage.
- Clean away the packing from the pump port connections.
- Report any damage immediately to the carrier.
12
CONTACT CSI FOR MORE INFORMATION | CSIDESIGNS.COM | [email protected] | 417.831.1411
