3/23
ALFA IN a.s. ©
www.alfain.eu
1. INTRODUCTION
Congratulations on your new ALFA IN product. We are proud to have you as our
customer and will strive to provide you with the best service and reliability in the
industry.
This operating manual has been designed to instruct you on the correct use and
operation of your ALFA IN product. Your satisfaction with this product and its
safe operation is our ultimate concern. Therefore please take the time to read
the entire manual, especially the safety precautions. They will help you to avoid
potential hazards that may exist when working with this product.
Read and understand this entire manual and your employer’s safety practices
before installing, operating, or servicing the equipment. While the information
contained in this manual represents the manufacturer's best judgement, the
manufacturer assumes no liability for its use.
The model of PEGAS 201 MIG SYN PFC is the multi-function inverter power
generators
welding by those methods:
a) MIG/MAG in 2T, 4T, manually or synergic wires G3Si1 or stainless steel
0,6 - 1,0 mm, Al wires 1,0 mm, flux cored wires shelf shielding or standard
b) E – (MMA) coated electrodes up to 4,0 mm
c) TIG Lift arc
PEGAS 201 MIG SYN PFC is equipped by system of Power Factor Correction
(PFC).
What are the advantages of PFC solution?
1. Higher efficiency and less stress related to the circuit breaker (in other
words, circuit breaker will switch off later than the devices without PFC).
2. The machine can be connected to the mains 110 V - 230 V + -15% small
influence of under voltage and overvoltage mains power.
3. Smaller level of electromagnetic interference.
4. Minimum net reactive current loading.
We reserve the law of adjustments and changes in case of printing errors,
change of technical parameters, accessories etc. without previous notice. These
changes may not be reflected in the manuals for use in paper or electronic form.
