manualshive.com logo in svg

Aleratec Tower Publisher SLS 260202, User Manual

Easily duplicate and print multiple discs with the Aleratec Tower Publisher SLS 260202. This all-in-one duplicator and printer includes a User Manual for guidance. For a free download of the manual, visit manualshive.com and get started with your new disc publishing system today.

Share
Download
background image

www.aleratec.com

40

Stand-Alone Tower Publisher SLS: Tutorials

Select the Source drive

 - continued 

b.  Enter “Source Selection” menu.

Press 

ENT

 to enter into “Source Selection” menu.

You will see the following display:

 

Make sure it is located at “Drive 1 Port 0.0”. If not, press the 

UP

 or 

DOWN

 navigation button to search for it. There will be drive model

information where XXXXXX is shown above.

c.  Select desired master reading device.

Press the 

UP

 or 

DOWN

 button to select the desired master reading source. 

Then press 

ENT

 to submit your Source Selection.

d.  Once your selection has been changed successfully, you will see the 

following screen for 2 seconds:

Then you will be directed back to the main menu:

Drive 1 Port 0.0
XXXXXX

COPY

USB

PRINT

SOURCE

ESC ENT

Drive 1 Port 0.0
 

Selected!

COPY

USB

PRINT

SOURCE

ESC ENT

DUPLICATOR 

1.00

9. Select Source

COPY

USB

PRINT

SOURCE

ESC ENT

Summary of Contents for Tower Publisher SLS 260202



















































































Reviews:

No comments

Related manuals for Tower Publisher SLS 260202

Brands by name

Popular brands

Load more brands