BOSS – Installation, Operation and Maintenance Manual
A l e n c o n S y s t e m s L L C - P a g e
|
24
PODD Setup
PODDs are accessed remotely over your local server using IP addresses. For the initial
setup, download a network IP scanner of your choice. A recommended IP scanner is
Angry IP Scanner
which can be downloaded from
https://angryip.org/download/
. Once
installed and opened, your local IP Range should automatically be set. Hit the start button
to scan your local network for PODDs.
Figure 13: Angry IP Scanner Interface
When a PODD is found, it will appear under the “Hostname” column as PODD-xxxx
where the ‘xxxx’ will be the last four digits of its serial number. Locate the IP address of
that PODD and type the IP address followed by: 8888
(ex.
123.456.789.012:8888
)
; Into the URL bar of your favorite web browser. The PODD setup should then be
completed and the HUB should start running. For questions regarding the HUB, please
refer to the Alencon HUB manual.
NOTE:
All PODDs must be powered during setup and the Centralized PODD must be set
up first.
For further information regarding PODD installation, mounting and wiring, please refer
Alencon’s PODD manual.
