Aleis ISO-FFW-6000, User Manual

Page: 21 / 45

Aleis ISO-FFW Series Operational Manual
Page 21 of 45
(Select required contrast Eg 90 = light contrast. 120= very dark.
Subject to viewing angle)
12.33 Buzzer
Turns the Buzzer On/Off
Off
On
12.34 Sleep Timer
Sets the Sleep Timer. The unit will turn off to save battery power if it is not
used in the selected time
5 Minutes
15 Minutes
30 Minutes
Disabled
12.35 Read Timer
Sets the read timer for handheld mode
3 Seconds
5 Seconds
10 Seconds
Continuous
12.36 Load Defaults
Loads the defaults back to factory settings
8030/50 Series
9030/50/60 Series
12.37 Set Date/Time
-Sets Date and Time
12.38 RFM Settings
FDX/HDX Mode
Sets the readers FDX/HDX mode
FDX/HDX With Boost
FDX Only
HDX Only With Boost
FDX/HDX
FDX/HDX Rx Only
Ant Tune Mode
Selects Auto or manual antenna tuing.
Auto Tuning
Maunual Tuning
Manual Tune Settings
When Manual tune is selected above you can change the tuning
value to suit the read requirement, either for a maximum voltage
(maximum range) or detune for a smaller read distance.
Sync Mode
Sets read cycle synchronization mode. Wired requires the TXS
(orange) signal wires to be connected to the unit if TX sync is a
slave.
Wireless
Wired
TxSync