Aleis ISO-FFW-6000, User Manual

Page: 24 / 45

Aleis ISO-FFW Series Operational Manual
Page 24 of 45
14.0
ISO-FFW9060 READER METHODS OF USE
There are four general methods of reading and recording data. Please read each method and follow
instructions covering the method you choose with your 9060 series system.
14.1 Record RFID No’s only (no data entry)
1. Turn Reader ON.
(If a previous session is still on screen press F3, go to step 4 below and start a new
session)
2. Read animal.
3. When finished reading, press F3 and turn reader OFF. Data can be download later at PC,
or, start a new session, and read another group of animals.
Start a new session:
1. To start a new session and read another group of animals, press MENU.
2. Select Session press OK.
3. New will be highlighted, press OK.
4. To read next group of cattle same as last group of cattle, press down arrow and select
Blank . .
5. Press OK. (Note: A blank data entry box will appear – go to step 9)
6. Press C (located to the left of the MENU button) to return to main reading screen.
7. Proceed to read next group of cattle.
14.2 Quick Data Entry – One only use of Template
Use this method when adding data to RFID’s and not saving template etc. Example: For
recording particular data on a rare occasion.
1. Turn Reader ON.
2. Press MENU.
3. Session will be highlighted, press OK.
4. New will be highlighted, press OK.
5. Press down arrow once to highlight the word Blank .
6. Press OK.
7. A table heading will appear.