Aleis ISO-FFW-6000, User Manual

Page: 10 / 45

Aleis ISO-FFW Series Operational Manual
10 of 45
9.1 How to: Read & Store RFIDs
1. Turn the 8030 Series Reader ON.
2. When Reading Press the button on the wand and wave the wand past the RFID device -
ear tag or rumen pellet. When reading rumen pellets, simply wave the wand in a reverse
‘L’ pattern behind the front leg of the animal, or in front of the brisket.
3. When you have finished reading, you may turn the Reader OFF, and download it later at
your PC, or you may start a new session and read another group of animals.
9.2 How to: Create Sessions using menu.
1. To start a new session to read another group of animals, simply press the MENU button.
2. The word ‘Session’ will be highlighted, press the OK button.
3. The word ‘New’ will be highlighted, press the OK button.
4. Select Yes by using the left arrow key, then press the OK button. (If previous sessions are
empty, you will not be able to create a new session)
5. Press the C button (located to the left of the MENU button) until you return to the main
reading screen, and read the next group of cattle.
9.3 How to: Create Sessions using F1 and F2 Keys.
1.
Press F2 to end current session.
2.
Press F1 to start new session. Four Beeps will be heard.
Note: you can start a new session even if the one you have ended has no RFID devices in it.
9.4 How to: Upload RFIDs into the Reader
The feature of uploading RFIDs into the 8030 portable wand is to allow you to find particular
RFIDs that you need to identify. For example, if you need to find a particular animal that was
treated with a certain medicinal treatment, you can upload the RFID into the reader. When you
read the animal with that RFID, the reader will alert you with a long series of beeps so that you
will know you have found the animal you were looking for.
To use this feature, there are two steps you will need to perform:
1. Create a file to upload into the reader.
2. Upload the RFIDs into the reader.
Before starting you will need:
1. Aleis DataLink installed on your computer.
2. A working COM port – you can check this by turning your 8030 reader on, and then opening
Aleis DataLink. Down the bottom right corner of the Aleis DataLink screen, you should see
that the software has connected to a particular unit.
3. A list of RFIDs that you want to put into the reader.