12
6.2 INSTALLATION:
• Only connect the power adapter to the baby unit or the parent unit or discon-
nect when the power adapter is taken out of the wall outlet.
• Don’t install the DVM-120 during an electrical storm.
• Do not touch any uninsulated adapter cables unless the adapters have been
taken from the wall outlet.
6.3 RECEPTION INDICATOR / OUT OF RANGE ALERT:
• On the top left in the image of the parent unit the strenght is indicated by which
the signal from the baby unit is received:
: very good reception
: good reception
: moderate to good reception
: poor reception
• Once the parent unit doesn’t receive a signal from the baby unit (out of range
or the baby unit is switched off) ‘ ’ (no reception) is diplayed and the picture
turns to black.
• Also every second sounds an alarm tone. As soon as the parent unit receives
the signal again from the baby unit, the image lights again.
6.4 DELAY IN SOUND AND VISION:
• The baby unit sends the image and sound in digital blocks to the parent unit.
The parent unit turns these signals into a recognizable image and an audible
sound. Between the time of moving and making noise and displaying / hearing
on the parent unit is therefore a slight delay.
• Also, the sound and the image on the parent unit are not exactly running in
sync with each other.
6.5 POWER SUPPLY:
• Baby unit:
The baby unit draws its power only from the supplied power adapter. The baby
unit has no built-in battery for portable use.
• Parent unit:
The parent unit is powered by 3.7V rechargeable lithium-ion battery; this can
feed the parent unit 5 to 7 hours.
Top right of the display is shown the battery charge:
: battery is fully charged
: battery is 2/3 charged
: battery is still 1/3 charged, charging is desired
: battery is empty and the parent unit will turn off
About 5 minutes before the battery will be fully discharged, the red indicator
above the display flashes. Also attention beeps sound.
Now connect the adapter immediately.
In about 6 hours the adapter has a battery recharged, whether through the
parent unit is switched on or off.
