6
3. Slide the battery cover back on the parent unit.
Don’t force placing the battery.
Only use the supplied rechargeable Li-ion battery (3.7V, 800mAh).
Power adapter:
1. Connect the other power supply adapter with the connector on the side of
the parent unit.
2. Connect the adapter to a 230V outlet.
Only use the supplied power adapter with modelnumber TGE050P055.
Make sure the power cable can not lead to stumble or fall. Bundle too long wires
with tape or with specially for this purpose designed and available wire ties.
Charge:
Once you have connected the parent unit to the power adapter and the adapter is
connected to a 230V wall outlet, the battery is charging.
•
Charge for the first time use the battery for at least 15 hours, even though
there is an the indication that the battery is fully charged.
• The charging circuit for the battery is controlled electronically, there is no
danger of overcharging, so you can leave the adapter plugged in
• continuously.
• In case you are not using the set for a long period of time (> 2 months), it is
advisable to take the adapter from the wall outlet and remove the battery from
the parent unit. When resuming operation, first properly recharge the battery.
Audio/Video connection:
Use this connection to display the image on a (big screen) TV to view or record.
Note that if you insert a 3.5mm plug here, the own screen of the parent unit is
being switched off.
Belt clip and desktop stand:
Optionally, you can slide the belt clip on the back of the parent unit to carry the
parent unit with you, or you can use the table stand to place the parent unit on a
table or desk.
AV
ON
OF
F
AV
ON
OF
F
