10
Display temperature in °C of in °F:
1. push, after selecting the adjacent icon, the OK button to select this
function
2. set with buttons and the desired display
3. press button 2x to capture the setting and exit the menu
The DVM-120 only displays the temperature of the room where the
baby unit is placed; you can not set alarm in here.
Note that the temperature is displayed only indicative, you must consi-
der a possible deviation of + or - 2 degrees.
Multicamera:
1. push, after selecting the adjacent icon, the OK button to select this
function
2. scroll buttons and to the desired camera to see the picture
from there (an asterisk behind the camera number indicates that
this camera is registered), or scroll to view all registered came-
ras in sequence.
3. push button 2x to capture the sensitivity and exit the menu
Please note that with choice every 15 seconds will be switched to the
next camera; there will NOT be automatically switched
to a camera where sound is detected.
Is there no connection to the camera when it is switched to that camera
(out of range or the camera is off), the parent unit displays a black
screen during this period. Instructions to register expansion cameras to
the monitor are described in Chapter 5.
4.4 AUTOMATIC NIGHTVIEW:
There are 6 infrared LEDs built in the baby unit; these LEDs are switched on
automatically when it’s getting dark at the baby unit and
switched off when it is getting light again. These LEDs can illuminate objects to a
distance of about 2 meters. Note that in the dark, so
when the night vision LEDs are turned on, the image black / white is displayed on
the parent unit.
Caution: Infrared light can not be perceived by the human eye; so
you can not see with the naked eye that these LEDs are activated.
Depending on the type of infrared LED is a visible red glow, however,
possible.
