13
6.6 INTERFERENCE-FREE:
• This image baby monitor is digitally coded. So you will never receive the signal
from other equipment nor will the signal of your baby unit (s) be displayed on
the parent unit of, for example, your neighbors.
• In case the baby unit (s) or parent unit is located in or in close proximity to
electromagnetic fields, the signal can then (video or audio) experience some
disturbance. In this case try a different location for the baby unit (s) or the
parent unit or move, if possible, the source of the interference.
6.7 REACH:
•
The range of the video baby monitor is up to 300 meters in the open field and
up to 50 meters in house; the range depends on local
•
conditions. Are the units out of range from each other the image first freezes a
few seconds (no movement) followed by ‘ ’ (no reception),
• the screen turns black. Also every second sounds an alarm tone.
6.8 BUGGING / TAPPING:
• The bugging / tapping of this video baby monitor is virtually impossible. Not
only it is necessary to be in the range of the video baby
• monitor, one also needs expensive equipment.
6.9 MAINTENANCE:
• Clean the video baby monitor only with a damp cloth; do not use chemical
cleaning products. Before cleaning, the adapters should be disconnected.
6.10 ENVIRONMENT AND DISPOSAL:
• You can hand in the packaging of this video baby monitor as wastepaper.
However, we recommend to keep it so that during transport, the device can be
properly packaged.
• Defect or elaborate batteries must be handed over to your local depot
for chemical waste or the dedicated battery collection points. Never
throw developed batteries with household waste.
• Is the video baby monitor replaced, hand it over to your supplier; they
provide an environmentally friendly processing.
6.11 IN CASE OF NO PICTURE, NO SOUND:
– the parent unit and the baby unit are turned on? (connected adapter,
batteries fully charged?)
– is the parent unit within the range of the baby unit?
– the baby unit is not disabled as a result of silence? (VOX)
– the volume on the parent unit is not at 0 (off)?
