AFTER SALES SUPPORT
23
1300 855 831
MODEL: HCE2500 PRODUCT CODE: 64124 03/2019
AUS
HCE2500
Troubleshooting
XI. Troubleshooting
Problem
Possible Cause
Action
The high pres-
sure washer
does not work.
No electrical voltage to the high
pressure washer.
Check the fuse, power cable
and power plug and have
them replaced by qualified
personnel if necessary.
The cross section of the extension
cable is not large enough and/or
the extension cable is too long.
Use extension cables with
larger cross sections and/or
use shorter extension cables.
The mains voltage is lower than
that specified.
Contact the power supply
company if necessary.
The high pressure washer is
frozen.
Check and thaw if necessary.
The motor
starts but
there is no
pressure
build-up.
Air intake in the water inlet.
Check the supply hose and
hose connectors and replace
if necessary.
Water cock closed.
Turn open the water cock.
The operating
pressure is
irregular.
Air intake in the water inlet.
Check the supply hose and
hose connectors and replace
if necessary.
