AFTER SALES SUPPORT
19
1300 855 831
MODEL: HCE2500 PRODUCT CODE: 64124 03/2019
AUS
HCE2500
Assembly/Before operation
fastening points at the side of the high pressure washer.
Mounting of the high pressure hose (Fig.3)
1 Remove the black cap from connection for high pressure hose (5).
2 Connect the high pressure hose (2) with the connection for high pressure hose
(5).
Mounting of the high pressure hose and the gun (Fig.4)
1 Plug the high pressure hose (2) into the gun (14).
2 For removal of the high pressure hose (2), push the lever (B) and pull out the
high pressure hose (2).
Mounting of the extension and the accessories (Fig.4)
1 Plug the extension (13) into the gun (14) and twist it.
2 If you require the brush (18), plug it into the gun (14) instead of the extension (13)
and twist it.
3 Plug the required accessory (10; 15; 16; 17) into the extension (13).
4 For removal, press the button (A) and remove the accessory.
VIII. Before operation
It is recommend for the power supply to this high pressure washer either to be
connected via a residual current device circuit-breaker, which interrupts the power
flow as soon as the leakage current to earth exceeds 30 mA for 30 ms, or for it to be
equipped with an earth tester.
Before you connect the high pressure washer to the mains supply make sure that
the data on the rating plate are identical to the mains data.
Warning! Always pull
the power plug before making adjustments to the high pressure washer
