1
AFTER SALES SUPPORT
1300 855 831
MODEL: HCE2500 PRODUCT CODE: 64124 03/2019
AUS
Operation/Maintenance and cleaning
HCE2500
22
Turbo nozzle (16): This accessory is intended for stubborn dirt.
90° Turbo nozzle (17): The 90° Turbo nozzle (17) can be used for cleaning gutters
and car underbodies.
Brush (18): The brush (18) can be used for cleaning cars and large areas. This acce-
sory operates in a low pressure mode.
After use
1. Disconnect the high pressure washer from water supply.
2. Empty the high pressure washer by using the gun for a few seconds.
3. Switch off the high pressure washer.
4. Disconnect the high pressure washer from power supply.
5. Let the high pressure washer cool down.
6. Check after each use if the high pressure washer is damaged.
X. Maintenance and cleaning
Pull out the power plug before every maintenance operation. This also includes
connecting to the water supply or trying to eliminate leaks. There is a risk of electro-
cution or of injury from moving parts.
Cleaning
It is recommended to clean the high pressure washer after each use.
Never direct the water jet against the high pressure washer, nor clean the
high pressure washer under flowing water. This could give rise to the danger
of electric shock and damage the high pressure washer!
Always keep the high pressure washer clean. Do not use any detergents or solvents.
• Always keep the ventilation slots clean and free from dirt and dust.
• Only clean the high pressure washer with a soft brush or a slightly moist cloth.
• If nozzles are soiled or blocked, you can remove any foreign bodies in the nozzle
using the nozzle cleaning needle (11).
Maintenance
The high pressure washer is maintenance free.
